|
|
 |
Model
900x
- Solder
the wires to the points following the
diagram. The color of each wire and
the color on the diagram go together.
Solder the red wire to the red point,
and the green wire to the green point,
etc.
-
To install the chip very lightly coat
the tip of the wire with solder. Then
hold the wire on the soldering location.
While the wire is still on the spot
touch the wire with your iron.
It should attach instantly and your
connection is done.
- After
you have soldered all the points, check
all your connections and make sure no
bare wire touches any other points.
No solder should be on any other points
besides the soldering locations in the
diagram.
- You
can just leave the mod chip sit there
or you can tape it down
- Reconnect
everything else you took off or disconnected
before installing the chip
- Reassemble
your Playstation and make sure the mod
chip and wires do not get caught
- As
long as you've followed the instructions
carefully, you will have no problems.
Click
here for the SCPH-900x diagram
|
|
|
08-13-08
Wasabi wii-clips are
now instock!
06-15-08 The
latest Wasabi v2 modchip is now
instock and will ship the same day.
06-9-08
Great News! The latest
version of the Wii D2Pro 9 has arrived
this morning, which are D2C2 compliant.
06-08-08
The long awaited D2Sun v2.0 w/solderless
clip is now available and it works
with all versions of Wii currently
on the market.
|
|
|
|
