Please use "Right Click" and "Save as" (each diagram is around 500k.)

Xbox (Pal, US, Asian, Jap)

Version 1.0

Version 1.1

Version 1.2 and Version 1.3

Version 1.4

Version 1.5

Version 1.6

Installing pin socket to chip. (diagrams are by Arakon)

Soldering pin socket to chip.

---

DuoX 2 Lite has 2 boot modes.

- DuoX 2 Lite Enabled
- DuoX 2 Lite Disabled.

It is assumed that your machine is in the Power Off  mode, ie machine is not switched on

DuoX 2  Lite Mode (Duo-X 2 Lite enabled)

                                

- Power on Xbox with the "Power" button.

 

Original Bios Mode (Duo-X 2 disabled)

- Power on Xbox with the "Eject" button.

Please note: To change between modes, the xbox  must be put into power off mode.

 

Additional information

How can I tell which version Xbox do I have?
- Please check xbox-scene. Click here for the version page.

Examples of installs?
Wire
Direct
Header

Bios?
- It is your decision whether to flash it with a different bios. However, we do not recommend it though. This is because we believe for most people, there is really no need for it.
(However, due to restrictions of certain countries. Your chip might not come with a working bios.)

What do I have to add to evox.ini?
- The latest version of EvolutionX should already contain the relevant information.

ie. 
0x01a4,"AMD",0x80000
0x04a4,"FUJITSU ",0x80000

Xbox Live?
- If you ever log onto Xbox Live with the chip enabled. That particular xbox  eeprom  would then be banned permanently.